C series remote I/O

CT-731F 18 ọwa ike nkesa modul (24VDC)

CT-731F 18 ọwa ike nkesa modul
Atụmatụ modul

◆ Nkwado nkesa ike na saịtị, mmepụta bụ 24VDC
◆ Nkwado mgbasawanye nke ọwa 18
◆ Achọghị nhazi na enweghị oghere na nhazi.

ajuju nkọwa
ODOT CN-8012: Profibus-DP Bus nkwụnye

CN-8012 Ihe nkwụnye ụgbọ ala Profibus-DP

Nlebanya modul

Ihe nkwụnye netwọkụ CN-8012 PROFIBUS-DP na-akwado ịnweta ọkọlọtọ PROFIBUS-DP, na ụdị protocol ọ na-akwado bụ DPV0.

ajuju nkọwa
CT-730F 18 ọwa ike nkesa modul (0VDC)

CT-730F 18 ọwa ike nkesa modul

Atụmatụ modul

◆ Nkwado nkesa ike na saịtị, mmepụta bụ 0VDC.
◆ Nkwado mgbasawanye nke ọwa 18.
◆ Achọghị nhazi na enweghị oghere na nhazi.

ajuju nkọwa
CT-5331 Canopen Master station IO modul

The CANopen master modul na-akwado 1 x CAN interface, na-akwado CANopen master arụ ọrụ mode.

Enwere ike itinye CT-5331 na modul ihe nkwụnye I / O, yabụ ọ nwere ike ịtụgharị CANopen n'ime usoro iwu ndị ọzọ, dị ka Modbus-TCP,

Profinet, EtherCAT, Ethernet/IP, etc. Mgbe eji modul, ntinye na iwu mmepụta mkpa ka ahazi na IO Config software.

site na interface Type-C nke modul.

Ngwaọrụ ohu niile na-akwado ụkpụrụ CANopen nwere ike iji modul a jikọọ na PLC dị elu ma ọ bụ kọmputa dị elu,

Dị ka: Canope remote IO ọdụ, Canope dị iche iche sensọ, CANopen ọkwọ ụgbọala na na.

ajuju nkọwa
CT-3848 8 ọwa Analog Input Thermocouple (TC-J/K/E/T/S/R/B/N)

Atụmatụ modul

◆ Filter parameters nwere ike mmezi
◆ Modul na-akwado nnweta mgbaàmà thermocouple ọwa 8
◆ Modul na-ebu ihe ngosi 8analog LED
◆ The modul na-akwado ụdị 9 nke ụdị nha okpomọkụ nke thermocouple
◆ Ụgbọ ala nke ime modul na ntinye ubi na-anabata ikewapụ magnetik
◆ Ọwa ntinye modul na-akwado nchekwa oke ọkụ nke TVS
◆ 24-bit ADC mkpebi (Σ-δ ụdị)

ajuju nkọwa
CT-3234 4 ọwa ntinye analog / 0&4-20mA/15-bits

Atụmatụ modul

◆ The modul na-akwado 4-channel ugbu a nweta mgbaàmà.

◆ Enwere ike ịhazi modul maka 0-20mA ma ọ bụ 4-20mA nnweta mgbaàmà ugbu a.

◆ The modul na-akwado 2-waya (na-abụghị loop mmepụta, mpụga ike ọkọnọ chọrọ) ma ọ bụ 4-waya ihe mmetụta mmetụta ugbu a.

◆ Ụgbọ ala nke ime modul na ntinye ubi na-anabata mkpuchi magnetik.

◆ A na-ejikọta ọwa ntinye modul na mpaghara ihe mgbaàmà analog na-arụ ọrụ ugbu a.

◆ Ọwa modul na-eji nchekwa oke ọkụ nke TVS.

ajuju nkọwa
CT-3734 4 ọwa RTD-PT100 okpomọkụ nnweta modul

Atụmatụ modul

◆ The modul na-akwado 4-ọwa RTD thermal eguzogide (PT100) okpomọkụ nnweta.

◆ Ọwa ndị dịpụrụ adịpụ, na voltaji dịpụrụ adịpụ bụ 1500V

◆ Enwere ike jikọọ modul ahụ na 2-waya ma ọ bụ 3-waya PT100 okpomọkụ ihe mmetụta.

◆ Ụgbọ ala nke ime modul na ntinye ubi na-anabata ikewapụ magnetik

◆ The modul na-ebu na 4 analog input ọwa LED egosi

◆ 15-bits ADC mkpebi

ajuju nkọwa
CT-3844 4 ọwa Analog Input Thermocouple (TC-J/K/E/T/S/R/B/N)

Atụmatụ modul
◆ Filter parameters nwere ike mmezi
◆ The modul na-akwado 4-channel thermocouple enweta mgbaàmà
◆ The modul na-ebu na 4 analọg LED egosi
◆ The modul na-akwado ụdị 9 nke ụdị nha okpomọkụ nke thermocouple
◆ Ụgbọ ala nke ime modul na ntinye ubi na-anabata ikewapụ magnetik
◆ Ọwa ntinye modul na-akwado nchekwa oke ọkụ nke TVS
◆ 24-bit ADC mkpebi (Σ-δ ụdị)

ajuju nkọwa
CT-3723 3 ọwa RTD-PT1000 okpomọkụ nnweta modul

Atụmatụ modul

◆ The modul na-akwado 3-ọwa RTD thermal eguzogide (PT1000) okpomọkụ nnweta.

◆ Enwere ike jikọọ modul ahụ na 2-waya ma ọ bụ 3-waya PT1000 okpomọkụ ihe mmetụta.

◆ Ụgbọ ala nke ime modul na ntinye ubi na-anabata ikewapụ magnetik

◆ The modul na-eburu 3 analog input ọwa LED egosi

◆ 15-bits ADC mkpebi

ajuju nkọwa
CT-121F: 16 ọwa dijitalụ ntinye/24VDC/ ụdị sink

CT-121F: 16 ọwa dijitalụ ntinye / 24VDC / Sink ụdị / Ntinye dị elu dị irè

Atụmatụ modul

◆ modul na-akwado ntinye dijitalụ ọwa 16, na-akwado ntinye sink, na voltaji ntinye bụ 24VDC.

◆ modul nwere ike ịnakọta mgbaàmà mmepụta dijitalụ nke akụrụngwa ubi (kọntaktị akọrọ ma ọ bụ mmepụta arụ ọrụ).

◆ Enwere ike ịnweta modul ahụ na 2-waya ma ọ bụ 3-waya ihe mmetụta dijitalụ.

◆ ụgbọ ala ime na ntinye ubi nke modul jiri opto-isolator.

◆ modul na-akwado ọrụ njide mgbaàmà ntinye, na enwere ike ịtọ oge njide.

◆modul ahụ na-ebu ọwa ntinye dijitalụ 16 nwere ihe ngosi LED na ọwa ọ bụla.

◆ na-akwado ọrụ ịgụta ọnụ, site na ịgbakwụnye sub-modul.

◆ ọwa ntinye ọ bụla nke modul na-akwado counter 32-bit na ọnụọgụ ọnụ <200Hz.

◆ modul nwere ike ịtọ oge nzacha ntinye mgbama dijitalụ na usoro nnyefe byte nke counter.

◆ ọwa ọ bụla nke modul ahụ nwere ike ịtọ ọnọdụ ịgụta ọnụ na ntụzịaka n'onwe ya.

ajuju nkọwa
CT-3134 4 ọwa Ntinye voltaji

CT-3134 4 ọwa Ntinye voltaji 0 ~ 5/0 ~ 10 / ± 5 / ± 10VDC, 15 ibe n'ibe / 16 ibe n'ibe

Atụmatụ modul

◆ Modul na-akwado ọwa 4 nke ntinye mgbama voltaji

◆ The modul nwere ike weghara 0 ~ 5VDC, 0 ~ 10VDC, ± 5VDC, ± 10VDC, na 15 ibe n'ibe, 16-bit mkpebi.

◆ The modul na-ebu na 4 analog input ọwa LED egosi

◆ Mgbama ntinye modul bụ ntinye ntinye ala na-enwe otu kwụsịrị

◆ Enwere ike ịtọ oge nzacha

◆ Enwere ike gbanyụọ ọwa n'onwe ya

◆ Na iche n'etiti ọwa

ajuju nkọwa
CT-7339 18 ọwa ikike nkesa modul (24VDC / 0VDC)

Atụmatụ modul

◆ Nkwado nkesa ike na saịtị, mmepụta bụ 24VDC / 0VDC
◆ Nkwado mgbasawanye nke ọwa 18, ọwa 9 nke 24VDC, ọwa 9 nke 0VDC.
◆ Achọghị nhazi na enweghị oghere na nhazi.

ajuju nkọwa